SE Intl Radiation Area Monitor - AM71313

SE Intl - Radiation Area Monitor - AM71313

Supplier: InMed Healthcare

Radiation Area Monitor - AM71313

AM-71313 Radiation Area Monitor

In Stock

The Radiation Alert® Area Monitor is one of the most user friendly, all inclusive, state of the art radiation area monitors available. The easy to use interface is an intelligent resistive touch screen display featuring a large five digit LED readout.

It comes with either an internal or external detector and free software for monitoring every Radiation Alert® Area Monitor on your network. Includes user selectable warning indicators for low and high radiation alarm levels, and detector failure. Setup email and text alerts to receive alarms while on the go. All the settings are stored internally, even when power is disconnected. All units come with a Certificate of Conformance. NIST Source calibrations available upon request.

Internal or External Probe Options Available.

Detector

LND 71313 Energy Compensated GM Detector

Sensitivity

7.5 cps/mR/hr

Dead Time

User adjustable to compensate for dead time of the detector and electronics

Operating Range

0.01 to 1500 mR/hr (0.1 – 15,000 µSv/hr)

Response Time

Varies automatically from 20 seconds to 2 seconds

Touch Screen Display

4.3 inch TFT 480×272 touch screen display with user friendly Programmable Units of Measurement and Audio and Visual Alarms. 5-digit LED display with 3 cm (1.5 in.) character height. 65K true colors capable of displaying full color images, animations, icons.

Base Unit Settings

Alarms and Calibration Information can be accessed through the Touch Screen Display or through the software.

Base Units

Can be set in µR/hr, mR/hr, µSv/hr, mSv/hr, CPM, kCPM, CPS, kCPS

Base unit Settings

Settings for Base Units, Alarms and Calibration Information can be accessed through the Touch Screen Display or through the software

Linearity

NIST Calibrated readings within 10% of true value with detector connected

Indicators

Ultra-Bright Strobe and Audible Alarm. Can trigger up to three relays with DB-9 serial connection. USB VCP for computer data logging, can also be used to control the unit with use of remote software for alarm indication and acknowledgment (Silence by remote).

Ethernet

10 Base-T connection for use with remote software for alarm indication and acknowledgment (Silence by remote)

High Voltage

User adjustable from 200 to 1200 volts

Power

12 VDC wall mount adapter included.

Battery Charger

SLA Battery is continuously trickle charged when the instrument is connected to line power and turned on

Battery Life

Typically 5 hours in non-alarm condition; 6 hours in alarm condition

Temperature Range

-10° to +50°C (14° to 122°F)

Humidity

10% to 70% Non-Condensing.

Construction

Easy mount steel enclosure

Includes

Management software for use with networked area monitors, Base Unit, Power Supply,

Options

External Strobe and Horn, External Detector and 50’ C to C coax cable, NIST Calibration Limited

To contact InMed Healthcare about SE Intl Radiation Area Monitor - AM71313 use Get a quote.