"This site takes away all the problems of securing a good product and making a decision…"
How MedicalSearch works
1. Tell us what you need
in a few quick steps
2. Get personalised quotes
from expert suppliers
3. Compare and make the
best choice
Looking to buy the best Alphabite Bite Registration & Impression Material for sale? Get Quotes sends your requirements to expert suppliers in Australia so you get personalised quotes to compare Bite Registration & Impression Material prices, specifications, features and terms then choose the one that’s right for you. Also compare servicing, consumables and reviews, so you can buy with confidence.
Amalgadent Dental | Dental Consumables & Equipment Amalgadent offers simple solutions to complex problems. Australian owned and operated since 1991 supplying dental practices nationwide.
Our strength comes from our technically trained staff who can advise which products are needed, and how to use them.
We understand the biology, the materials and the chemistry.
We offer a range of easy to use, time saving materials that ...
What is a bite registration and impression material?
A bite registration and impression material is a dental material used to create an accurate mold of a patient's teeth and bite. The bite registration material is used to record the relationship between the upper and lower teeth, while the impression material is used to create a detailed mold of the teeth and surrounding tissues. These materials are commonly used in the fabrication of dental restorations such as crowns, bridges, and dentures. They are typically made of a silicone or polyvinyl material that is safe and non-toxic for use in the mouth.
What are the different types of bite registration and impression materials available in Australia?
There are several types of bite registration and impression materials available in Australia, including:
Polyvinyl siloxane (PVS): This is a popular material for both bite registration and impression taking. It is easy to use, has good dimensional stability, and is available in a range of viscosities.
Polyether: This material is known for its accuracy and stability, making it a good choice for bite registration. It is also less sensitive to moisture than other materials.
Alginate: This is a low-cost material that is commonly used for preliminary impressions. It is easy to use and sets quickly, but it is not as accurate as other materials.
Zinc oxide eugenol (ZOE): This material is often used for bite registration because it is easy to manipulate and has a good flow. However, it is not as accurate as other materials and can shrink over time.
Wax: This material is used for bite registration and can be easily shaped to fit the patient's teeth. It is not as accurate as other materials, but it is useful for preliminary impressions.
Silicone: This material is used for bite registration and is known for its accuracy and stability. It is also easy to use and has a good flow.
Overall, the choice of material will depend on the specific needs of the patient and the preferences of the dentist.
What are the factors to consider when choosing a bite registration and impression material?
When choosing a bite registration and impression material, there are several factors to consider. These include:
Setting time: The setting time of the material should be considered to ensure that it provides enough working time and sets within a reasonable time frame.
Viscosity: The viscosity of the material should be appropriate for the intended use. For example, a low viscosity material may be better for capturing fine details, while a high viscosity material may be better for capturing larger areas.
Compatibility: The material should be compatible with the other materials being used in the dental procedure, such as the tray material and the stone used for pouring the impression.
Accuracy: The material should provide accurate and precise results to ensure that the final restoration fits properly.
Ease of use: The material should be easy to manipulate and handle, and should not require excessive force or pressure to obtain an accurate impression.
Patient comfort: The material should be comfortable for the patient to tolerate, and should not cause any discomfort or irritation.
Cost: The cost of the material should be considered, as some materials may be more expensive than others. However, cost should not be the only factor considered, as accuracy and ease of use are also important considerations.
How do I use a bite registration and impression material?
To use a bite registration and impression material, follow these steps:
Prepare the patient: Have the patient rinse their mouth with water and dry their teeth with air.
Mix the bite registration material: Follow the manufacturer's instructions to mix the bite registration material.
Place the bite registration material: Have the patient bite down on the material, making sure to capture the bite registration accurately.
Remove the bite registration material: Once the material has set, remove it from the patient's mouth.
Mix the impression material: Follow the manufacturer's instructions to mix the impression material.
Place the impression material: Fill the impression tray with the material and place it in the patient's mouth, making sure to capture all teeth and surrounding tissues.
Remove the impression tray: Once the material has set, remove the impression tray from the patient's mouth.
Inspect the impression: Check the impression for accuracy and completeness. If necessary, take a new impression.
Send the impression to the lab: Send the impression to the dental lab for fabrication of the final restoration.
What is the shelf life of a bite registration and impression material?
However, in general, the shelf life of dental materials can vary depending on the type of material and the manufacturer's recommendations. It is important to always check the expiration date on the packaging and follow the storage instructions to ensure the material remains effective and safe to use.
Can I use a bite registration and impression material for both dental and orthodontic purposes?
Yes, bite registration and impression material can be used for both dental and orthodontic purposes. These materials are commonly used to create molds of the teeth and bite for various dental and orthodontic procedures. However, it is important to select the appropriate type of material for the specific purpose and to follow proper technique to ensure accurate results.
Are there any safety concerns when using a bite registration and impression material?
However, it is important to note that there may be safety concerns when using a bite registration and impression material. Some materials may contain allergens or irritants that can cause adverse reactions in some individuals. It is important to follow the manufacturer's instructions and use appropriate personal protective equipment when handling these materials. Additionally, improper use or handling of these materials can result in inaccurate impressions or bite registrations, which can lead to problems with dental restorations or orthodontic treatment. It is always best to consult with a dental professional for guidance on the safe and effective use of these materials.
How do I store a bite registration and impression material?
Bite registration and impression materials should be stored in a cool, dry place away from direct sunlight and heat sources. They should be kept in their original packaging and stored according to the manufacturer's instructions. It is important to check the expiration date before using the materials and discard any expired products. Additionally, it is recommended to keep the materials in a separate storage area to avoid contamination with other dental materials.
What is the cost of a bite registration and impression material in Australia?
However, the cost of bite registration and impression material in Australia may vary depending on the brand, quantity, and supplier. It is best to check with dental supply stores or online retailers for current pricing information.
Get 3+ Quotes Now - Compare prices, availability and quality. It’s free, quick and secure.
Back to top
Bite Registration & Impression Material Costs and Supplier Insights
Bite Registration & Impression Material costs approximately $70.
Use Get Quotes to receive personalised prices and proposals from trusted suppliers with top reviews and excellent service.
Buy a Bite Registration & Impression Material Near Me
Save time and delivery costs while getting fast support, by contacting Bite Registration & Impression Material suppliers near you.