Suction Tube & Tubing Suppliers in Adelaide

Suction tubing is a medical device used to remove fluids from a patient's body during surgery, medical procedures, or in cases of emergency. It consists of a flexible tube made of plastic or rubber and is attached to a suction machine. The machine creates a vacuum by drawing air out of the tube, which then pulls fluids or other substances through the tube and into a collection container. The suction tubing may have various sizes and shapes depending on the specific procedure or application it is used for. It is an important tool in medical settings as it helps prevent infections, remove excess fluids, and maintain a clear field of view during surgeries and procedures.

Suction tubing is a medical device used to remove fluids from the body during surgical procedures or to clear airways from mucus or other secretions. There are various types of suction tubing available, including:

• Yankauer suction tubing: This is a rigid suction tube with a bulbous tip used for oral and nasal suctioning.
• Poole suction tubing: This is a flexible suction tube with multiple openings used for suctioning large volumes of fluids during surgery.
• Frazier suction tubing: This is a thin, flexible suction tube used for delicate procedures, such as neurosurgery.
• Ventouse suction tubing: This is a suction device used during childbirth to assist with the delivery of the baby.
• Tracheal suction tubing: This is a suction tube used to clear the airways in patients with respiratory issues.
• Closed suction tubing: This is a closed system suction tubing used to reduce the risk of infection during suctioning procedures.

Overall, the type of suction tubing used depends on the specific medical procedure or condition being treated.

Size is an important factor to consider when choosing suction tubing. The size of the tubing will determine the amount of suction that can be generated and the rate at which fluids or secretions can be aspirated. The size of the tubing should be appropriate for the type of procedure being performed and the size of the patient. A larger diameter tubing will provide more suction power, but it may be more difficult to maneuver in small spaces. The length of the tubing should also be considered, as longer tubing may cause a decrease in suction pressure due to friction. It is important to choose tubing that is compatible with the suction device being used and that meets safety standards.

The material used for suction tubing can vary depending on the manufacturer and intended use. These materials are flexible, durable, and resistant to kinking and collapsing, which is important for maintaining suction pressure during medical procedures. Some suction tubing may also have an anti-static coating to prevent the buildup of static electricity, which can be a safety hazard in certain environments.

It is essential to refer to the manufacturer's instructions or consult with a medical professional to determine the maximum suction pressure that a particular tubing can handle safely. Exceeding the recommended maximum suction pressure can lead to tubing failure, causing injury or harm to the patient.

Can be sterilized for reuse, but it is recommended to use disposable suction tubing for infection control purposes. If reusable suction tubing needs to be sterilized, it should be cleaned thoroughly and then sterilized using an appropriate method such as autoclaving or chemical sterilization. It is also important to check the manufacturer's instructions for proper care and maintenance of the suction tubing.

Should be stored in a cool, dry place away from direct sunlight and sources of heat. It is best to store suction tubing in a clean, closed container to protect it from dust and other contaminants. When not in use, suction tubing should be coiled and stored in a way that prevents kinks and bends that can damage the tubing. It is important to inspect suction tubing regularly for signs of wear and damage, and to replace it when necessary to ensure safe and effective use.

Should be replaced every 3 to 6 months, or sooner if damaged or visibly dirty. It is important to replace suction tubing regularly to maintain proper suction and prevent contamination of the patient and equipment. Additionally, suction tubing should be inspected before each use to ensure it is free of cracks, kinks, or other damage that could affect suction performance.

To connect the suction tubing to the suction machine, locate the suction port on the machine and insert the end of the tubing firmly into the port. Twist the tubing slightly to secure it in place.

• To connect the suction tubing to the suction catheter, first ensure that the catheter is sterile and ready for use. Then, locate the connector on the catheter and insert the other end of the tubing firmly into the connector. Twist the tubing slightly to secure it in place.

Once the tubing is connected to both the suction machine and the suction catheter, turn on the machine and adjust the suction level as needed. Be sure to follow proper suctioning technique and dispose of used equipment properly.