Neurotrac - Verity MyoPlus2 Pro EMG Machine Get latest price

Read more...

To contact Performance Health ANZ about Neurotrac Verity MyoPlus2 Pro EMG Machine use Get a quote.

The  Verity NeuroTrac MyoPlus2 Pro EMG Machine is designed for physiotherapists in mind to be used as a portable tool. Suitable as a personal trainer for in-clinic or home use (under guidance).

Pre-set programmes for incontinence treatment, sports and muscular development, neuromuscular rehabilitation.

Key Features

• 2 channel EMG (Biofeedback) combined with 2 channels of NMES (stimulation).
• 2 channel ETS (EMG triggered stimulation) with stimulation on 2 channels.
• Single-phase or multiphase operation: multiphase allows EMG/ETS/STIM to be combined in one programme.
• Multilingual LCD screen and voice prompts for Biofeedback.
• Manual and Automatic threshold control.
• EMG Biofeedback between stimulation (muscle activity and tiredness indication when using muscle stimulation).
• Stand alone device or used in conjunction with established multilingual software.
• Up to 10 meters of wireless (Bluetooth) connection for NeuroTrac software.
• For home users: Produces and prints (with the optional PC software) the comprehensive patient progress reports on a day to day basis providing average readings (2 channels) on work/rest, peak, onset and muscle release times, work and rest deviations and the average mA current.
• Used as a learning tool for both patient and clinician with emphasis on improving treatment techniques in the use of EMG and Neuromuscular stimulation.

Technical Specifications:

• EMG (Biofeedback)
• Dual channel EMG
• EMG Range: 0.2 to 2000 μV RMS (continuous)
• Sensitivity: 0.l μV RMS
• Accuracy: 4% of μV reading +/-0.3 μV at 200 Hz
• Selectable Bandpass filter – 3db Bandwidth
  • Wide: 18 Hz +/- 4 Hz to 370 Hz +/- 10% – Reading below 235 microvolts 10 Hz +/-3 Hz to 370 Hz +/- 10% – Reading above 235 microvolts
  • Narrow: 100 Hz +/- 5% to 370 Hz +/- 10%
• Notch filter: 50 Hz (Canada 60Hz) – 33 dbs (0. 1% accuracy)
• Common Mode Rejection Ratio: 130 dbs Minimum @ 50 Hz
• Work / Rest periods: 2-99 seconds
• Number of Trials: 2-99

STIM (Neuromuscular Stimulation)

• Amplitude: 0-90 mA into 500 Ohm load – actual mA will tend to be less than indicated due to electrode impedance: at 1000 Ohms load (electrodes in poor condition) the maximum will be limited to 75 mA, at 1500 Ohms load the maximum will be limited to 50 mA.
• Type: Constant current, maximum output voltage 70 Volts +5 / -10 Volts
• Waveform: Symmetrical, rectangular, bi-phasic with net zero DC current
• Pulse width selection: 50-450 μS (2% accuracy)
• Pulse rate selection: 2-100 Hz (2% accuracy)
• Work / Rest periods: 2-99 seconds
• Time: 1 – 99 minutes
• Ramp up time: 0.1 – 9.9 seconds
• Preset and user programmable treatment programs
• Automatic output shut off with detection of open electrode above 0.5 mA
• Battery: 4 x AA.
• Low battery indication at 5.4 volts +/- 0.2 volts, automatic shut off when voltage drops below the low indication. Replace the batteries immediately.
• Expected average battery set life [of standard 800 mAh, alkaline]:
• MyoPlus2: 12-16 hours in STIM, 25 hours in EMG mode.
• MyoPlus4: 8-16 hours in STIM, 25 hours in EMG mode.
• Environmental Conditions for use: +5 to +40 degrees Centigrade. 15-93% Humidity.
• Environmental conditions for storage & transport: -25 to +70 degrees Centigrade. 15-93% Humidity.
• Physical dimensions: 150mm (L), 89mm (W), 35mm (D)
• Weight: 0.16kg (without batteries)

Accessories Included

• Dual lead wire x 4
• EMG reference wire
• Self-adhesive electrodes (50 x 50 mm)
• 1.5V AA batteries x4
• Carrying Case
• Stand
• Rubber sleeve with belt clip
• Operating Manual
• Gift Box
• Warranty: 2 Years on Unit

Read less...

To contact Performance Health ANZ about Neurotrac Verity MyoPlus2 Pro EMG Machine use Get a quote.