NK Optik Dental Light Curing Unit | Otoflash ...
The Otoflash G171 can be used for the photo-polymerisation of all light-curable materials where the curing takes place at a wavelength of 280-580 nm and, thus, enables the production and processing of light curable materials of different consistencies and pigmentation as well as repairs with corresponding materials and lacquering.
Also work-pieces and build-platforms produced by means of 3-D-rapid prototyping-techniques can be postured by the Otoflash G171.
Due to its technical configuration, the Otoflash G171 enables particularly short curing times: In the operating. mode, 2 flash-bulbs fitted at the bottom of the securing chamber produce 10 very intensive light-flashes per second between 280-580 nm. This leads compared to other methods to a substantially better curing quality, resulting in very good physical characteristics and reduced residual monomer content.
The G171 Otoflash is also deliverable with a protective gas appliance (N2, Ar or CO2). This prevents any oxygen inhibition on the surfaces so that they're cured completely non-stick without any need to remove or wipe away the inhibition layer.
Technical data
Dimensions of polymerisation: approx 120 x 120 x 50 mm
Number of light sources: 2 flashbulbs a 100 W
Rated voltage: 100, 117, 230 volt AC, adjustable by switch
Rated frequency: 50 / 60 Hz
Power input: 250 W
Spectral distribution: 280 - 700 nm, maximum between 400 and 500 nm
Average flash power: 200 W
Flash frequency: 10 flashes per second
Digital timer: adjustable from 1 to 9.999 flashes
Dimensions: 310 X 310 x 140 mm
Weight: approx. 7 kg
To contact Australian Imaging about NK Optik Dental Light Curing Unit | Otoflash G171 use Get a quote.
The Otoflash G171 can be used for the photo-polymerisation of all light-curable materials where the curing takes place at a wavelength of 280-580 nm and, thus, enables the production and processing of light curable materials of different consistencies and pigmentation as well as repairs with corresponding materials and lacquering.
Also work-pieces and build-platforms produced by means of 3-D-rapid prototyping-techniques can be postured by the Otoflash G171.
Due to its technical configuration, the Otoflash G171 enables particularly short curing times: In the operating. mode, 2 flash-bulbs fitted at the bottom of the securing chamber produce 10 very intensive light-flashes per second between 280-580 nm. This leads compared to other methods to a substantially better curing quality, resulting in very good physical characteristics and reduced residual monomer content.
The G171 Otoflash is also deliverable with a protective gas appliance (N2, Ar or CO2). This prevents any oxygen inhibition on the surfaces so that they're cured completely non-stick without any need to remove or wipe away the inhibition layer.
Technical data
Dimensions of polymerisation: approx 120 x 120 x 50 mm
Number of light sources: 2 flashbulbs a 100 W
Rated voltage: 100, 117, 230 volt AC, adjustable by switch
Rated frequency: 50 / 60 Hz
Power input: 250 W
Spectral distribution: 280 - 700 nm, maximum between 400 and 500 nm
Average flash power: 200 W
Flash frequency: 10 flashes per second
Digital timer: adjustable from 1 to 9.999 flashes
Dimensions: 310 X 310 x 140 mm
Weight: approx. 7 kg
To contact Australian Imaging about NK Optik Dental Light Curing Unit | Otoflash G171 use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product