The SSV-3 Standard saves you time and money by discarding contaminated solvent and returning clean solvent to the reservoir.
Description
The SSV-3 is a very easy to use, low cost solvent recycler, which has been designed and built in Australia to very high standards.
Mobile Phase containing 50% solvent costs about $8.00 per litre. Add to this preparation time and waste disposal costs and 2.5 litres of MP for a standard HPLC run costs around $35.00.
The SSV-3 Standard can reduce these costs to just $10.70 per run. This translates to a saving of $5150 per year per HPLC!
The SSV-3 Solvent Saver also removes the need to make extra Mobile Phase for OOS investigations, and reduces instrument wear and damage to HPLC pumps, seals and pistons.
Multi-Lambda Scientific also manufactures a dual valve SSV-3. The SSV-3 Extended has features in addition to the SSV-3 Standard, which include:
Programmable wash time (Flushed out destructive buffers / solvents at the end of a run
"Pump Off" function (Switches the pump off after the wash)
Key Benefits
If you use less solvent during a run, you will need to buy less solvent.
By using less solvent during a run, you save on Mobile Phase preparation time.
If you generate less waste, you save on waste disposal costs, while benefiting the environment.
The SSV-3 is very simple to use and features a rate mode, which stops the system from running dry by compensating for detector drift. This feature is extremely valuable, especially for overnight runs.
Features
Single Valve Recycling for HPLC
Backlit 32 Character LCD Display
Validation Output
Rate Mode
External Override Feature
3m Teflon Tubing
3 x Valve Connectors
1 x 3-Way Solenoid Switching Valve (2 x 3-Way with SSV-3 Extended)
3 x pre-installed Solvent Resistant Tubing to valve adapters
To contact Elm Scientific about Solvent Recycler - SSV-3 Standard use Get a quote.
The SSV-3 is a very easy to use, low cost solvent recycler, which has been designed and built in Australia to very high standards.
Mobile Phase containing 50% solvent costs about $8.00 per litre. Add to this preparation time and waste disposal costs and 2.5 litres of MP for a standard HPLC run costs around $35.00.
The SSV-3 Standard can reduce these costs to just $10.70 per run. This translates to a saving of $5150 per year per HPLC!
The SSV-3 Solvent Saver also removes the need to make extra Mobile Phase for OOS investigations, and reduces instrument wear and damage to HPLC pumps, seals and pistons.
Multi-Lambda Scientific also manufactures a dual valve SSV-3. The SSV-3 Extended has features in addition to the SSV-3 Standard, which include:
Programmable wash time (Flushed out destructive buffers / solvents at the end of a run
"Pump Off" function (Switches the pump off after the wash)
Key Benefits
If you use less solvent during a run, you will need to buy less solvent.
By using less solvent during a run, you save on Mobile Phase preparation time.
If you generate less waste, you save on waste disposal costs, while benefiting the environment.
The SSV-3 is very simple to use and features a rate mode, which stops the system from running dry by compensating for detector drift. This feature is extremely valuable, especially for overnight runs.
Features
Single Valve Recycling for HPLC
Backlit 32 Character LCD Display
Validation Output
Rate Mode
External Override Feature
3m Teflon Tubing
3 x Valve Connectors
1 x 3-Way Solenoid Switching Valve (2 x 3-Way with SSV-3 Extended)
3 x pre-installed Solvent Resistant Tubing to valve adapters