Eltek - Temperature Transmitters for Temperature/Heat Flux Monitoring

Supplier: Connected IoT

Temperature Transmitters for Temperature/Heat Flux Monitoring

Transmitters for heat flux monitoring

In Stock

GS42H & GS44H (A/B/C/D/E)

General purpose bipolar range transmitters that are designed to be used with the HukseFlux HFP01 heat flux plate. The GS42H has two inputs and the GS44H has four inputs; all inputs have the same range. This range is hardware configured at the time of manufacture. The transmitter will have a suffix letter corresponding to the range - see the specification section for more details.

Sensors

Hukseflux HFP01 heat flux sensor

HFP01 heat flux sensor is frequently specified for building performance monitoring studies, that is through walls and building envelopes. The total thermal resistance is kept small by using a ceramics-plastic composite body. The sensor is very robust and stable. It is suitable for long term use on one location as well as repeated installation when a measuring system is used at multiple locations.
HFP01 measures heat flux through the object in which it is incorporated or on which it is mounted, in W/m2. The sensor in HFP01 is a thermopile. This thermopile measures the temperature difference across the ceramics-plastic composite body of HFP01. A thermopile is a passive sensor; it does not require power. Using HFP01 is easy. The heat flux in W/m2 is calculated by dividing the HFP01 output, a small voltage, by the sensitivity. The sensitivity is provided with HFP01 on its calibration certificate. A typical measurement location is equipped with 2 or more sensors.

Accessories

WBG Wall bracket docking kit

This kit enables fitment of the transmitter's built-in wall bracket to difficult or uneven surfaces. The kit provides additional docking security.

The following products are supported:

All GD, GC, GL and GS series transmitters
RP250GD repeater and RC250 receiver

To contact Connected IoT about Eltek Temperature Transmitters for Temperature/Heat Flux Monitoring use Get a quote.

GS42H & GS44H (A/B/C/D/E)

General purpose bipolar range transmitters that are designed to be used with the HukseFlux HFP01 heat flux plate. The GS42H has two inputs and the GS44H has four inputs; all inputs have the same range. This range is hardware configured at the time of manufacture. The transmitter will have a suffix letter corresponding to the range - see the specification section for more details.

Sensors

Hukseflux HFP01 heat flux sensor

HFP01 heat flux sensor is frequently specified for building performance monitoring studies, that is through walls and building envelopes. The total thermal resistance is kept small by using a ceramics-plastic composite body. The sensor is very robust and stable. It is suitable for long term use on one location as well as repeated installation when a measuring system is used at multiple locations.
HFP01 measures heat flux through the object in which it is incorporated or on which it is mounted, in W/m2. The sensor in HFP01 is a thermopile. This thermopile measures the temperature difference across the ceramics-plastic composite body of HFP01. A thermopile is a passive sensor; it does not require power. Using HFP01 is easy. The heat flux in W/m2 is calculated by dividing the HFP01 output, a small voltage, by the sensitivity. The sensitivity is provided with HFP01 on its calibration certificate. A typical measurement location is equipped with 2 or more sensors.

Accessories

WBG Wall bracket docking kit

This kit enables fitment of the transmitter's built-in wall bracket to difficult or uneven surfaces. The kit provides additional docking security.

The following products are supported:

All GD, GC, GL and GS series transmitters
RP250GD repeater and RC250 receiver

Read less...

To contact Connected IoT about Eltek Temperature Transmitters for Temperature/Heat Flux Monitoring use Get a quote.

Let Connected IoT provide you with a quote

Supplier

Get a quote

Supplier: Connected IoT

Location: Cremorne Point, NSW

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Connected IoT are also proudly displaying these credentials:

Location:

Cremorne Point , NSW

Joined:

Jun 2023

Level:

Standard Storefront

Verified:

Is this your product? Manage products / company details |

Report this product