Gas Regulator - Oxygen, Nitrous Oxide, CO2 Suppliers in Perth

An oxygen regulator is a device used to control the flow of oxygen from a cylinder or tank. Its purpose is to ensure that the oxygen is delivered at a safe and consistent pressure to the patient or user. Oxygen regulators are commonly used in medical settings, such as hospitals and clinics, as well as in home healthcare settings for patients who require supplemental oxygen therapy. They may also be used in industrial settings for welding and cutting applications.

There are several types of oxygen regulators available in Australia, including fixed flow regulators, variable flow regulators, and conserving regulators. Fixed flow regulators deliver a constant flow of oxygen, while variable flow regulators allow the user to adjust the flow rate. Conservating regulators are designed to conserve oxygen by delivering oxygen only when the user inhales. There are also portable oxygen regulators available for use on-the-go.

The maximum flow rate of oxygen that an oxygen regulator can deliver depends on the type and model of the regulator. However, most standard oxygen regulators can deliver a maximum flow rate of 15 liters per minute. Some high-flow oxygen regulators can deliver up to 25 liters per minute. It is important to consult the manufacturer's specifications for the specific regulator being used to determine its maximum flow rate.

The pressure range of an oxygen regulator is typically between 0 and 4000 psi.

An oxygen regulator is a device that controls the flow of oxygen from a tank to a patient. The safety features of an oxygen regulator include:

• Pressure relief valve: This valve releases excess pressure from the regulator to prevent it from exploding.
• Flow control knob: The flow control knob allows the user to adjust the flow of oxygen to the patient.
• Gauge: The gauge displays the pressure of the oxygen tank and the flow rate of the oxygen.
• Oxygen supply tubing: The tubing connects the regulator to the oxygen tank and the patient.
• Non-return valve: The non-return valve prevents the backflow of oxygen from the patient to the regulator.
• Filter: The filter removes any impurities or contaminants from the oxygen before it reaches the patient.
• Alarm: Some oxygen regulators have an alarm that sounds when the oxygen pressure drops below a certain level.

All these safety features ensure that the patient receives the correct amount of oxygen and that the regulator operates safely.

No, it is not recommended to use an oxygen regulator for other gases besides oxygen. Oxygen regulators are designed specifically for use with oxygen and may not be compatible with other gases. Using an oxygen regulator with other gases can be dangerous and may result in equipment damage or injury. It is important to use the appropriate regulator for each gas to ensure safety and proper function.

Choosing the right oxygen regulator depends on several factors such as the type of oxygen tank you have, the flow rate you need, and the purpose of use. It is important to consider the compatibility of the regulator with the tank, the accuracy of the flow rate, and the durability of the regulator. Additionally, you should also consider the ease of use and maintenance, as well as any safety features that may be necessary for your specific application. It is recommended to consult with a healthcare professional or oxygen supplier to ensure you select the appropriate regulator for your needs.

The lifespan of an oxygen regulator can vary depending on the manufacturer and model. However, most regulators have a lifespan of 5-7 years with proper maintenance and regular inspections. It is important to replace the regulator if it shows signs of wear and tear or if it fails to function properly.

To maintain and clean your oxygen regulator, follow these steps:

• Turn off the oxygen supply and release any remaining pressure from the regulator.
• Remove the regulator from the cylinder and disassemble it by unscrewing the adjusting screw and the diaphragm assembly.
• Clean the regulator body and all parts with a mild soap and water solution. Rinse thoroughly and dry with a clean cloth.
• Inspect the diaphragm for any signs of wear or damage. If necessary, replace it with a new one.
• Lubricate the regulator with a small amount of silicone grease or oil.
• Reassemble the regulator and adjust the pressure to the desired level.
• Test the regulator for leaks by turning on the oxygen supply and checking for any hissing sounds or bubbles.
• Store the regulator in a clean, dry place away from direct sunlight and extreme temperatures.

Repeat this process every six months or as recommended by the manufacturer to ensure the safe and proper functioning of your oxygen regulator.