MRI QC Phantom - PRO-MRI ACR for sale from InMed Healthcare

MRI QC Phantom - PRO-MRI ACR

Supplier: InMed Healthcare

MRI QC Phantom - PRO-MRI ACR

In Stock

ACR accredited Medium MRI phantom for comprehensive evaluation of critical imaging parameters of magnetic resonance imaging (MRI) in a time efficient manner. The phantom can be used for the measurement of absolute values for calibration purposes. However, its design is optimized for time efficient daily quality assurance too.

It can be used to measure:

geometric distortion
spatial resolution
slice thickness and position
interslice Gap
image bandwidth
low contrast detectability
image uniformity
signal-to-noise ratio (SNR)
physical and electronic slice offset
point of reference
bandwidth: water-fat shift

Technical Data:

outside cylinder diameter: 178 mm (7’’)
outside cylinder height: 157 mm
inside cylinder diameter: 165 mm (6,5’’)
inside cylinder height: 134 mm
the phantom is filled with 10 millimolar (mmol) nickel chloride solution containing 0.45% by weight sodium chloride
the outside of each phantom has the words “NOSE” and “CHIN” etched into it as an aid to orienting the phantom for scanning, as if it were a head

Resolution Insert:

four matrices of holes, diameters: 0.8, 0.9, 1.0 and 1.1 mm
spaces between the holes are equal to hole diameters
two small containers with water and fat for water-fat shift evaluation

‍Slice Thickness Insert:

1 mm wide counter-descending slits on both sides
slits form two ramps descending at 1:10

‍Geometric Distortion Insert:

3x3 holes array, 40 mm spacing,
2 mm diameter
120 mm on a side
10 mm thick

Low Contrast Insert:

partial volume contribution of these sheets and filling solution produce contrasts: 1.4, 2.5, 3.6, and 5.1%
each disc contains 10 groups of 3 holes arranged in spokes
each spoke has the same diameter
diameters range from 7.0 to 1.5 mm

‍‍Slice Position Accuracy:

one set of paired 45° wedges. The distance between the intersection of the wedges is 100 mm

‍‍Product Included:‍

hard-sided carrying case (MR unsafe) (09-102)
optional 2-axis spirit level (09-104-1)

To contact InMed Healthcare about MRI QC Phantom - PRO-MRI ACR use Get a quote.

It can be used to measure:

geometric distortion
spatial resolution
slice thickness and position
interslice Gap
image bandwidth
low contrast detectability
image uniformity
signal-to-noise ratio (SNR)
physical and electronic slice offset
point of reference
bandwidth: water-fat shift

Technical Data:

outside cylinder diameter: 178 mm (7’’)
outside cylinder height: 157 mm
inside cylinder diameter: 165 mm (6,5’’)
inside cylinder height: 134 mm
the phantom is filled with 10 millimolar (mmol) nickel chloride solution containing 0.45% by weight sodium chloride
the outside of each phantom has the words “NOSE” and “CHIN” etched into it as an aid to orienting the phantom for scanning, as if it were a head

Resolution Insert:

four matrices of holes, diameters: 0.8, 0.9, 1.0 and 1.1 mm
spaces between the holes are equal to hole diameters
two small containers with water and fat for water-fat shift evaluation

‍Slice Thickness Insert:

1 mm wide counter-descending slits on both sides
slits form two ramps descending at 1:10

‍Geometric Distortion Insert:

3x3 holes array, 40 mm spacing,
2 mm diameter
120 mm on a side
10 mm thick

Low Contrast Insert:

partial volume contribution of these sheets and filling solution produce contrasts: 1.4, 2.5, 3.6, and 5.1%
each disc contains 10 groups of 3 holes arranged in spokes
each spoke has the same diameter
diameters range from 7.0 to 1.5 mm

‍‍Slice Position Accuracy:

one set of paired 45° wedges. The distance between the intersection of the wedges is 100 mm

‍‍Product Included:‍

hard-sided carrying case (MR unsafe) (09-102)
optional 2-axis spirit level (09-104-1)

Read less...

To contact InMed Healthcare about MRI QC Phantom - PRO-MRI ACR use Get a quote.

Let InMed Healthcare provide you with a quote

Supplier

Get a quote

Supplier: InMed Healthcare

Distribution: Australia and New Zealand

Location: Seven Hills, NSW

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. InMed Healthcare are also proudly displaying these credentials:

Established:

2002

Employees:

6-20

Certifications:

ISO9001

Distribution:

Australia and New Zealand

Location:

Seven Hills , NSW

Joined:

Apr 2024