The S-Class Autoclaves With Vacuum for sale from Labora Aspac

The S-Class Autoclaves With Vacuum

Supplier: Labora Aspac

The S-Class Autoclaves With Vacuum

The European Standard EN 13060 for small sterilizers describes the three methods/types of sterilization cycles: B, S and N.

They work with a fractionated pre-vacuum and their capacity can be compared to that of large hospital autoclaves. The medical practice operator stipulates in the risk analysis and specification of the preparation steps which method is applied to prepare the instruments used.

In practices which do not use narrow-bore and simultaneously long hollow-bodied instruments, a "Class 5" autoclave can be the right alternative to the "Class B" autoclave. "Class 5" autoclaves do not operate with a fractionated vacuum, but with a simple pre- and post-vacuum. Autoclaves which only offer "Class N" cycles are not suited for sterilizing wrapped instruments.

One system - two autoclaves

To meet the different needs in sterilizing instruments, MELAG offers the Euroklav + in two sterilization chamber sizes. The diameter for both autoclaves is 25 cm, the length of the sterilization chamber of the Euroklav 29 VS+ = 35 cm and Euroklav 23 S+, 23 VS+ = 45 cm.

The special process

To meet the stringent requirements of a "Class S" autoclave according to EN 13060, the air must be completely removed from the sterilization chamber, the interior of the instruments and the wrappings. The Euroklav + autoclaves meet this specification by an effective pre-vacuum in combination with a fractionated gravity system.

Easily adjustable special functions

The operator herself can easily handle special options such as switching over an internal feed water supply from the integrated water storage tank to an external water treatment unit connected to the autoclave.

It is just as simple to select an output medium for the documentation, e.g. printer, MELAflash CF Card Printer or practice computer system.

That also saves time in operating the autoclave.

Quick sterilization programs

Autoclaves with B cycles must meet the most stringent requirements.

The Euroklav + autoclaves are usually considerably faster than other devices on the market. Using the quick program, unwrapped instruments can already be removed after 20 minutes, including pre-vacuum and vacuum quick drying.

The design - functional and attractive

Not only the performance and production quality of the Euroklav + autoclaves underline MELAG's dominant position, their design makes these devices visually top class.

Operating the autoclaves should be both pleasurable and safe. The design fully supports this demand. It shows what's essential, and does its work efficiently. The large door lock is not only a design feature, but also ensures a safe and easy opening and closing of the door.

The large integrated funnel-shaped opening of the water storage tank makes it easy to fill the tank with demineralized or distilled water in the Euroklav 23 5+, 23 VS+ and 29 VS+. Alternatively, both autoclaves could be fed the required water supply from any external reserve vessel or even be connected to a water- treatment unit.

The regular draining of the used distilled or demineralized water from the water storage tank of stand-alone autoclaves is generally a cumbersome manual task for the practice team. The used demineralized or distilled water can quickly be removed from the water storage tank without effort via the quick release connector of the Euroklav 23 5+, 23 VS+ and 29 VS+ autoclaves. If the installation conditions permit, it is also recommended to connect the stand-alone autoclaves to a drain. Then the used water is automatically drained from the autoclave storage tank.