Tunstall - Medical Alarms | GO Get latest price

Read more...

To contact Tunstall Healthcare about Tunstall Medical Alarms | GO use Get a quote.

Following a button press, users can be located by SmartCare® Locate (a purpose-built web application by Chiptech that displays Tunstall GO’s current position), which displays GPS data and features an algorithm to refine a user’s location.

This multifunctional device includes a help button, handsfree speakerphone system, GPS location, and optional fall detection. Tunstall GO has the flexibility to be worn in different ways to suit the preference of the individual. Supplied with a hypoallergenic chain and split ring, Tunstall GO can be worn around the neck, fixed to a belt, key ring, or conveniently placed in a pocket. Charging Tunstall GO is smooth and easy using the wireless charging system.

Key Features

• 3G cellular connection
• Hands-free communication
• GPS location via SmartCare® Locate portal
• Qi wireless charging
• Water resistant (IP67)
• Internal RFID information storage
• Lost and Flight Modes

Technical Specifications

• System
  • • Tunstall GO is supplied with:
    A hypo-allergenic stainless steel chain so it can be
    worn as a pendant. An alternate black lanyard can be
    purchased.
    • A split ring which enables Tunstall GO to be attached to a
    key ring, belt clip or lanyard.
    • A wireless charger, plug pack and USB cable.
    • A step-by-step user guide.
    • Tunstall GO has an internal RFID chip which stores
    information to identify the device.
    • Nano SIM, production fitted and cannot be changed.
• Dimensions
  • • 67mm x 47mm x 13.5mm (L x W x H).
    • Weighs 33g excluding attachment method (chain or split
    ring).
    • Tunstall GO is laser sealed, therefore no changes can be
    made to the SIM card or Tunstall GO’s internal hardware.
    Software and configuration changes are available through
    the Chiptech SmartCare® Cloud.

Battery and Charging

• The lithium-ion battery is rechargeable and will run for approx 1 months with standard use
before requiring a charge. Tunstall GO’s battery will need to be charged after an emergency
activation. Standard use is: 7 hourly RF test transmissions, test signals every second day,
and two system checks per week being performed. We recommend that Tunstall GO is
charged after an emergency activation.
• Recharging takes approximately 3 to 5 hours.
• Voice messages and lights indicate when battery is low, at approx 20% capacity, and the
low battery is reported to Tunstall.
• Once charging and battery is greater than 3.7V, a battery charging report will be sent to
Tunstall.
• Battery life expectancy approximately 80% capacity can be expected after 350 -500 charges
(when charged in temperature of 25°C and fully discharged between cycles), and when the
battery is less than 3-5 years old.
• Battery Capacity: 300mA
• Battery maximum continuous discharge current: 600mA
• Charge Current Maximum: 200mA (0.7C).
• The inductive wireless charger supplied with each Tunstall GO device is Qi compliant.

Settings

• Contact ID reporting via CSV over cellular data (four destination
addresses, using a combination of static IP addresses and DNS).
• Automated self testing and a test signal is sent on the 3G network at a
defined period of time.
• Regular RF test transmission when learned into base unit.
• Installer menu and setting options are available when placed on charger.
Volume can be changed, Fall Detection or manual Cloud Connection
enabled. Flight Mode is available for transporting purposes

Environment

• Operating temperature of 0°C to + 50°C.
• IP67 and hot water resistant

GPS Location

• Location provided through assisted and autonomous
GPS methods.
• Periodic updates of GPS location are sent until the
emergency event is completed.
• GPS co-ordinates are transmitted via cellular data to
SmartCare® Locate or other GPS mapping platform.
GPS antenna tuning: 1574.42MHz.

Cellular

Requires nano SIM with 3G data reporting and incoming voice
enabled.
• AUS operates on either Telstra, Vodafone, or Optus.
Telstra approved cellular module.
• 3G module operates on 2100MHz and 850MHz or 900MHz.

RFID Tag

• ISO/IEC 15693-2, ISO/IEC 15693-3, ISO/IEC 18000
3, NFC Tag Type 2.

Read less...

To contact Tunstall Healthcare about Tunstall Medical Alarms | GO use Get a quote.